Electro-Voice Speaker System - Manual (Page 11)

11 Owners Manual
4/5 – Value Up/Down Buttons
Depending on the current LCD screen, the Value Up/Down Buttons performs
the following function:
Recall – Select forwards/backwards through the stored preset list to
select a preset to be recalled to current memory.
Store – Select User Preset destinations forwards/backwards to select a
destination for the currently edited preset, scroll forwards through ANSI
character set to name preset.
Edit / Setup – Scroll forwards/backwards through Edit / Setup screens
when the top line of the LCD screen is active. Scroll forwards through
values for the selected parameter in an Edit / Setup screen.
6 – Edit / Compare Button
Pressing the Edit button while in Run mode places the current preset in Edit
mode and the Edit button lights. The LCD display shows the last edit screen
that was selected. From this point, any edit screen can be displayed and
altered.
Pressing the Edit button again “compares” the edited preset, if parameters
have been altered, to the original un-edited preset. This compare function will
audibly switch between the altered parameters and the previously stored
settings, allowing you to hear the effect of any DSP changes that have been
made. Use this feature to monitor progress in editing or creating presets.
Subsequently recalling a new preset will prompt you to save changes, which
you may do or not.
7 – Setup Button
Pressing the Setup button while in Run mode displays the Setup menus in the
LCD display and the Setup button lights. In this mode, any Setup menu can
be displayed and altered. Changes made to Setup menu items are saved
automatically.
To exit Setup mode, press the Setup button again. The LCD display will revert
to Run mode.
8 – Select < Button
The Select < button is pressed to navigate backwards through Edit, Setup
and / or Recall menu displayed. The button cycles through all available value
fields in a screen and wraps around from first to last.
9 – Select > Button
The Select > button is pressed to navigate forwards through Edit, Setup and /
or Recall menu displayed. The button cycles through all available value fields
in a screen and wraps around from last to first.