Crivit SP - 603 MH - Manual (Page 4)

4
GB / CY
1. Important information
Please read the following instructions and in-
formation carefully before using your helmet.
This helmet was developed for motorcycling
and manfactured using the latest technology.
Although stringent safety standards were
met in the production of the helmet, injuries
may nevertheless occur as a result of serious
accidents. In some cases, the impact may be
such that the helmet cannot effectively protect
the motorcyclist from head injuries.
2. Important notes
• The helmet must sit securely and the chin-
strap must be firmly fastened.
• Do not wear scarves or other headgear
under the helmet.
• Ensure that the air circulation is not
restricted.
• Always ensure that the visor is clean and
free from scratches. Damaged visors
must be replaced immediately. You can
order replacement visors from the service
address provided. Tinted visors may not
be used in the dark or when visibility is
poor.
• The helmet is designed to protect the head
in the case of impact. This protection is
no longer guaranteed after just one (even
slight) shock. The helmet must therefore be
replaced immediately following an acci-
dent even if there is no visible damage.
• The helmet may not be transported han-
ging on the handlebars or any other part
of the machine. It must also be kept away
from hot parts (for example the exhaust).
• Solutions or scouring agents containing
petroleum should never be used to clean
either the outside or inside of the helmet.
Please always use pH neutral detergent.
Wipe the helmet dry with a soft cloth.
The padding can be cleaned using a soft
brush and a little soap.
• Only use genuine replacement parts for
your helmet.
• This helmet must fit well and be securely
fastened to provide adequate protection.
• Any helmet that has been exposed to
serious impact must be replaced.
Jet helmet SP-603 MH 04
1. Important information 04
2. Important notes 04
3. Changing the visor 05
4. Retention system/ Safety fastening 05
5. Inside padding 05