Crivit Pop-Up Beach Shelter - Manual (Page 17)

17 GB
Pop-Up Beach Shelter
Introduction
Congratulations! You have purchased a high-quality
product. The instructions for use are to be consid-
ered as part of this product. They contain important
instructions for use. Please read all the information
carefully before use. Keep these instructions in a safe
place. If you pass the product on to anyone else,
please ensure that you also pass on all the docu-
mentation with it.
Intended use
This product is intended for use as protection against
the wind and sun. The material of the beach tent is
not permanently waterproof. Therefore, it should
not be used in rain. The product is not intended for
commercial use.
Scope of delivery
1 Pop-Up Beach Shelter
1 Carry and storage bag
10 Tent pegs
2 Guy ropes
1 Set of instructions for use
Parts description
Guy rope (approx. 200 cm)
Tent pegs (approx. 18 cm x 4 mm)
Technical Data
Measurements
(assembled): approx. 200 cm (L) x 120 cm (W) x
90 cm (H)
Weight: approx. 1000 g
Packed size: approx. 62 cm diameter x 2.5 cm
Safety notes
KEEP THESE INSTRUCTIONS IN A SAFE PLACE.
WHEN PASSING THIS PRODUCT ON TO OTHERS,
PLEASE INCLUDE ALL THE DOCUMENTS. DO
NOT REMOVE ANY SEWN-IN LABELS.
Safety precautions for fire
and ventilation
CAUTION:
Additional ventilation is required when using
gas or other burners.
Do not place a hot appliance near to the walls,
ceiling or curtains.
Always observe the safety notices for this product.
Never allow children to play in the vicinity of
hot appliances.
Keep the exits clear.
Ensure you know the fire precautions of the site.
Ensure that the ventilation openings are always
open, in order to prevent suffocation.
Assembly / Before use
Assembly is not necessary because the article is
pre-assembled, with the exception of the guy ropes.
Use
Warning:
Please ensure that the poles are under tension and
that the beach tent always springs into its natural
shape. Ensure that the tensioning force does not
cause you injury.
Selecting a set-up location
Preferentially choose a flat clean set-up area.
Remove stones and similar objects, to prevent
damage to the floor.