Crivit Pop-Up Beach Shelter - Manual (Page 18)

18 GB
Take the beach tent out of the bag. Ensure that
the poles are under tension and that the tent
springs into its natural shape. Ensure that the
tensioning force does not cause you injury.
Assembling the beach tent
Throw the beach tent away from you into the
air. The entrance should not face into the wind
if possible.
When securing, in order to achieve better stead-
iness, ensure that the tent pegs are inserted into
the ground at an angle but without tension. The
material and the anchor points should only be
under light tension.
Special problems / Particular
environmental conditions
UV rays – all the tent materials suffer material
fatigue under strong sunlight and bleach to a
certain extent. During bad weather conditions
(storm), it is recommended that the beach tent
is dismantled.
Dismantling the beach tent
Please watch the tent dismantling information video,
by using the QR-code with a suitable appliance.
Attention: Please ensure that the poles are under
tension and that the beach tent always springs into
its natural shape. Ensure that the tensioning force
does not cause you injury.
For dismantling, please follow the descrip-
tions given with Figures 1–3.
To prevent the formation of mould or mildew
stains, always dismantle the beach tent in a
clean and dry condition.
Figure 1: Hold all the left and right arches to-
gether.
Figure 2: Stand the beach tent upright. Push the
upper arch (C) downwards with the left hand and
fold it in towards the centre (B) using your left hand.
Figure 3: Push the rings into each other and pack
the beach tent into the carry and storage bag.
Packing
Pack the cleaned accessories into the storage
bag supplied.
Lie the beach tent in the carry and storage bag
and carefully close the zipper.
Keep the article in a cool, dry and well-venti-
lated place away from frost. Avoid packaging
and storage in a damp condition, (formation of
mould, mildew).
Maintenance / Cleaning
and repair
Brush off dirt. Use clean water if necessary. For stub-
born stains, only use commercially available tent
care products. Please never wash in a washing ma-
chine or dry-clean! Holes or tears can also be glued
using the same material. The poles do not require
specific maintenance, other than being stored dry
and clean in the storage bag. The poles of this
product cannot be repaired.
Environmental instructions
and disposal information
Contact your local authorities for information on how
to dispose of the product at the end of product life.
Warranty
This tool has a warranty of 3 years from the date of
purchase. The product has been manufactured with
care and thoroughly inspected before delivery. Please
keep your receipt as proof of purchase. In the event
of a warranty claim, please contact our service