Emerson Nform And Interface Products - Manual (Page 8)

Liebert Shutdown Control:
Maximum Data Protection
MultiLink automated shutdown software allows you to actively protect data on servers supported by the Liebert UPS equipment
you are monitoring with OpenComms Nform, using the same OpenComms Web and OpenComms NIC cards.
MultiLink ® Shutdown
Software
Because today’s critical business
applications are often distributed
over several computers, there
is a need for shutdown software
capable of protecting information
on multiple machines. The
shutdown notifications from
OpenComms Nform to MultiLink
1.5 clients perform the critical task
of protecting your computers
from costly damage and data loss
as a result of power failure and
environmental alarm conditions –
on anything from a single
workstation to a network of
workstations and servers.
Stay In Control
During an extended utility failure,
MultiLink warns computer users
of impending power loss and
automatically shuts down computer
operating systems in a smooth and
orderly manner if the UPS battery
capacity runs low.
OpenComms Nform 1.2
Server with Viewer
Ethernet
Liebert NX
Nform Client
(Viewer Only)
MultiLink 1.5
Client
MultiLink 1.5
Client
MultiLink 1.5
Client
UPS Load
8
■ Automated and Orderly Shutdown
on Environmental, UPS and
Power conditions
■ Scalable
■ Network Based
■ Suitable for Single Workstation or
Network of Servers
■ Wide Operating System Capabilities
http://Multilink.liebert.com
MultiLink Advantages
MUL
TILINK SHUTDO
WN SOF
T
W
ARE