Wilton, Installing the light bulb & glass shaed – Kichler 300006 User Manual

Page 11

Text mode
Original mode

Wilton

Fig. 21

Fig. 22

Step 5. The square plastic wiring connector
from the ceiling fan and the light fixture will
only fit together one way. Match up the
color on the side of the connector, then
push them together until the snap engages.

Step 6. Tuck the connections neatly into
the switch housing. Align the key hole on
the switch housing with the screws on the
mounting plate. Turn the light fixture until is
locks in place at the narrow end of the key
holes. Tighten all 3 screws previously
loosened. (Fig. 21)

13. INSTALLING THE LIGHT BULB
& GLASS SHAED

Step 1. Slide the glass shade over the
threaded pipe. Place the silicon washer/
metal washer and thread the manual
nut onto the pipe. Place the decorative
plate and tighten the glass bowl with
the finial. (Fig. 22)

Metal washer

Silicon washer

Manual nut

Decorative plate

Finial

Bulb

Light kit

Connection plug