Kichler 300004 v.2 - Manual (Page 6)

5
Fig. 10
Registration slot
Step 7. Now lift the motor assembly into
position and place the hanger ball into the
hanger bracket. Rotate until the “Check Tab”
has dropped into the “Registration Slot” and
seats firmly. (Fig. 10) The entire motor
assembly should not rotate if this is done
correctly.
Fig. 9
Hitch pin Lock pin
Coupling cover
Decorative arm
Canopy
Downrod
Canopy cover
Screw
Step 6. Slip the coupling cover, decorative
arm, canopy cover and canopy onto the
downrod. Reinstall the hanger ball onto the
downrod and make sure the cross pin is in
place and the set screws are tight. Secure
the decorative arm assemble (with the lower
ends resting on the top of the ceiling fan) by
tightening the set screw. (Fig. 9)