Meredith, Installing the light bulb & glass shaed – Kichler 300004 v.1 User Manual
Page 11

10
Meredith
TM
Fig. 21
Fig. 22
Step 4. Connect the black wire connectors
from the light fixture and switch housing by
pushing them together. Follow the same
procedure with the white wire connectors.
Step 5. The square plastic wiring connector
from the ceiling fan and the light fixture will
only fit together one way. Match up the
color on the side of the connector, then
push them together until the snap engages.
Step 6. Tuck the connections neatly into
the switch housing. Align the key hole on
the switch housing with the screws on the
mounting plate. Turn the light fixture until it
locks in place at the narrow end of the key
holes. Tighten all 3 screws previously
loosened. (Fig. 21)
13. INSTALLING THE LIGHT BULB
& GLASS SHAED
Glass shade
Decoration plate
Finial
Manual nut
Silicon washer
Metal washer
Light kit
Connection plug
- 300106 v.2 (13 pages)
- 337013 (12 pages)
- 300106 v.1 (15 pages)
- 300427 (14 pages)
- 310101 (15 pages)
- 339211 (13 pages)
- 310104 (14 pages)
- 300011 (14 pages)
- 310102 (14 pages)
- 300143 (16 pages)
- 300143 (18 pages)
- 300143 (16 pages)
- 337016 (15 pages)
- 337016 (15 pages)
- 300019 (14 pages)
- 300148 (12 pages)
- 300009 (14 pages)
- 300009 (14 pages)
- 300008 (14 pages)
- 300113 (12 pages)
- 300121 (14 pages)
- 300105 (13 pages)
- 339400 (12 pages)
- 300181 (16 pages)
- 310131 (12 pages)
- 300017 (14 pages)
- 300126 (13 pages)
- 339011 (12 pages)
- 300000 (15 pages)
- 300145 (14 pages)
- 300138 (14 pages)
- 339017 (11 pages)
- 300119 (11 pages)
- 300016 (12 pages)
- 339212 (13 pages)
- 337013 (12 pages)
- 337015 (10 pages)
- 300004 v.2 (14 pages)
- 300137 (14 pages)
- 300262 (14 pages)
- 300006 (14 pages)
- 300140 (14 pages)
- 300124 (11 pages)
- 337013 (13 pages)