Eiki LC-XG250L - Manual (Page 11)

- 11 -
English
q STAND-BY button
Turn the projector off.
t ON button
Turn the projector on.
y INPUT 1 – 3 buttons
Select a input source (INPUT 1 – INPUT 3).
u AUTO PC button
Automatically adjusts the computer image to its optimum
setting.
i FREEZE button
Freeze the picture on the screen.
o Point ed 7 8 ( VOLUME + / – ) buttons
– Select an item or adjust the value in the On-Screen
Menu.
– Pan the image in Digital zoom + mode.
– Adjust the volume level (with Point
7 8 buttons).
Remote Control
!2 L-Click button
Acts as left mouse button for wireless mouse operation.
e Signal Emission indicator
Lights red while the laser beam is being emitted from the
laser light window or a signal is being sent from the
remote control to the projector.
!0 Presentaion Pointer button
Move a pointer of the projector or a pointer for wireless
mouse operation.
To ensure safe operation, observe the
following precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply benzene,
thinner, splay, or any other chemical materials.
w Wired Remote jack
Connect the remote control cable (not supplied) to this
jack when using as a wired remote control.
!1 INFO. button
Display the input source information.
r Laser Light window
A laser beam is emitted from here.
o
t
y
r
!0
u
i
!1
q e
!2
w