Eiki LC-XG250L - Manual (Page 10)

- 10 -
q
w
e
t
u
i
o
w LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life.
q WARNING TEMP. indicator
Blinks red when the internal temperature of the
projector exceeds the operating range.
e ON/STAND-BY button
Turn the projector on or off.
r INPUT button
Select an input source.
!1 INFO. button
Display the input source information.
y POINT ed7 8 (VOLUME +/–) buttons
– Select an item or adjust the value in the On-
Screen Menu.
– Pan the image in Digital zoom + mode.
– Adjust the volume level (Point
7 8 buttons).
u SELECT button
– Execute the selected item.
– Expand or compress the image in the Digital zoom
mode.
Top Control
r
y
!0
!1
!2
t LENS button
Enter the focus, zoom, and lens shift adjustment
mode.
i WARNING FILTER indicator
– Blinks orange indicating the filter needs cleaning.
– Lights orange when clogging of the filter is
detected, urging immediate cleaning.
o LAMP indicator
Lights red during operations.
!0 POWER indicator
– Lights when in stand-by mode and during
operations.
– Blinks during the cooling-off period.
– Blinks in the Power management mode.
!2 MENU button
Open or close the On-Screen Menu.
✔
Note:
•All five indicators on the top control blinks when the
projector detects an abnormal condition.