Exide Technologies PORTFOLIO PAR20 - Manual (Page 18)

18
Assembly Instructions:
Install standoff legs and standoff keys to module channel as shown. The cover is then installed by grasp-
ing it so that the GNB logo is upright. Locate slots at bottom of cover to bottom standoff legs and slide in
place. Locate holes at top of cover and install to top standoff legs.
Standoff legs need not be removed to access cells, simply remove protective cover.
Module Clear Cover Materials and Assembly
Figure 21
ITEM DESCRIPTION QTY PER SYSTEM
1 Cover 1
2 Standoff Leg 4
3 Standoff Key 4
BILL OF MATERIALS — MODULE CLEAR COVER MATERIALS