Edimax Technology AC-M1000 - Manual (Page 55)

Edimax AC-M3000/AC-M1000
User’s Manual
53
y Server IP: Enter the IP address/domain name of the LDAP server.
y Port: Enter the Port of the LDAP server, and the default value is 389.
y Base DN: Enter the base DN defined of the LDAP server.
y Account Attribute: Enter the account attribute of the LDAP server.
4.2.1.5 Authentication Method – NTDomain
Choose NTDomain in the Authentication Method field, the hyperlink next to the drop-down menu will become to
NTDomain Setting.
When POP3, Radius, LDAP or NTDomain is selected from the drop-down memu, the function of Enable VPN
Termination will show up. Check Enable VPN Termination to enable this function. Click the hyperlink of NT
Domain Setting for further configuration. Enter the related information of the primary server and/or the secondary
server (the secondary server is not required). The blanks with red asterisks are necessary information. These
settings will become effective immediately after clicking the Apply button.