Emerson EWC19D1 - Manual (Page 19)

– 19 – EN
0C28
– 19 –
• When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.
• When you turn "TV-Y" to [BLOCK] or [VIEW],
the all ratings will turn to [BLOCK] or [VIEW]
automatically.
• When you turn "TV-MA" to [VIEW], the all rat-
ings will turn to [VIEW] automatically.
When you select TV-Y7, TV-PG, TV-14, or TV-MA
and you press the Arrow B button, the sub-ratings
will appear on the TV screen.
If you select the rating category (example: TV-PG)
and turn it [BLOCK] or [VIEW], the sub-ratings
(example: V for Violence) will turn [BLOCK] or
[VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW]
individually when the rating category is set to
[BLOCK]. To set the sub-ratings individually, follow
the steps below.
• When you select [TV-Y7]:
Press the Arrow K or L button
to select "FV" (Fantasy
Violence). Then, press the Arrow
B
button to select [BLOCK] or
[VIEW].
• When you select [TV-PG],
[TV-14] or [TV-MA]:
Press the Arrow K or L button
to select "D"(Suggestive
Dialog), "L"(Coarse Language),
"S"(Sexual Situation), or
"V"(Violence). Then, press the
Arrow B button to select [BLOCK] or [VIEW].
NOTE: When you select [TV-MA], "D" does not
appear on the TV screen.
• The sub-ratings which set to [BLOCK] appears
next to the rating category in the TV RATING
menu.
5
Press the SETUP button to exit the setup.
• TV-Y: Appropriate for all children
• TV-Y7: Appropriate for children seven and
older
• TV-G: General Audience
• TV-PG: Parental Guidance suggested.
• TV-14: Unsuitable for children under 14
• TV-MA: Mature audience only
TV-Y7 [BLOCK]
FV [BLOCK]
TV-PG [BLOCK]
D [BLOCK]
L [BLOCK]
S [BLOCK]
V [BLOCK]
TV-Y [VIEW]
TV-Y7 ( ) [VIEW]
TV-G [BLOCK]
TV-PG (DLSV) [BLOCK]
TV-14 (DLSV) [BLOCK]
TV-MA ( LSV) [BLOCK]
[CHANGE ACCESS CODE]
To change access code, follow the steps.
1
Press the SETUP button so that the setup display
appears on the TV screen.
2
Press the Arrow K or L button to
point to "V-CHIP SET UP". Then,
press the Arrow B button.
3
Use the number buttons to enter 4-
digit access code. The default code
is 0000.
4
Press the Arrow K or L button to
point to "CHANGE CODE". Then,
press the Arrow B button.
5
Use the number buttons to enter
your desired access code in the
NEW CODE space. Then enter the
same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screen.
• If you enter wrong code, repeat
step 5, making sure you enter
the same new code exactly in
the confirm code space.
6
Press the SETUP button to exit the setup.
Note:
• If you unplug the power code or power failure
occures, the changed access code will be lost and
will return to default (0000). Change your access
code again as necessary.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ACCESS CODE
- - - -
TV RATING
MPAA RATING
CHANGE CODE
NEW CODE
CONFIRM CODE
- - - -
- - - -
NEW CODE
CONFIRM CODE
x x x x
- - - -
TD251EN 01.5.31 7:15 PM Page 19