Epson EB-440W - Manual (Page 41)

Freezing the Image (Freeze)
When the moving image on the screen is frozen, the image continues to
project, so you can project a moving image one frame at a time like a still
photo. Also, you can perform operations such as changing between files
during presentations from a computer without projecting any images if the
freeze function is activated beforehand.
Procedure
Remote Control
Each time you press the button, Freeze turns on or off.
q
• Audio does not stop.
• For moving images, the images continue to play back while the
screen is frozen, so it is not possible to resume projection from the
point where the screen was frozen.
• If the [Freeze] button is pressed while the Configuration Menu or a
Help screen is displayed, the menu or Help screen being displayed is
cleared.
• Freeze still works while E-Zoom is being used.
Changing the Aspect Ratio
Change the Aspect Ratio g when video equipment is connected so that
images that have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format. Change the Aspect Ratio when
projecting computer images at full size.
The changing methods and the types of Aspect ratio are as follows.
Changing methods
Procedure
Remote Control
Each time you press the button, the Aspect name is displayed on the screen
and the Aspect changes.
q
The aspect ratio can also be set from Aspect in the Signal menu from
the Configuration Menu. s
p.75
Functions for Enhancing Projection
41