Epson EB-440W - Manual (Page 85)

When WEP is selected
You can set the following items.
Sub Menu Function
WEP encryption You can set the encryption method for WEP encryption.
128bit
: Uses 128 (104) bit encoding
64bit : Uses 64 (40) bit encoding
Format You can set the input method for the WEP encryption key.
ASCII
: Input in text.
HEX : Input in HEX (hexadecimal).
Key ID You can select the WEP encryption ID key.
Encryption key 1
Encryption key 2
Encryption key 3
Encryption key 4 You can enter the key used for WEP encryption. Enter the key in single-byte characters, following the instructions from the network administrator for
the network in which the projector will participate. The type and number of characters that can be entered differ depending on the WEP encryption and
Format
settings.
If the number of characters you enter is shorter than the required character length, or if the number of characters you enter is longer than the required
character length, it does not connect.
128bit
- ASCII: Single-byte alphanumeric characters, 13 characters.
64bit - ASCII: Single-byte alphanumeric characters, 5 characters.
128bit - HEX: 0 to 9 and A to F, 26 characters
64bit - HEX: 0 to 9 and A to F, 10 characters
Authentication Type Set the WEP authentication type.
Open
: Uses open system authentication.
Shared : Uses shared key authentication.
When WPA-PSK (TKIP) or WPA2-PSK (AES) is selected
You can set the following items.
Sub Menu Function
PSK You can enter a PreSharedKey (encrypted key) in single-byte alphanumeric characters. Enter at least 8 and up to 63 characters. When you enter the
PreSharedKey, and press the [Enter] button, the setting value is displayed as asterisks (*).
You cannot enter more than 32 characters in the Configuration Menu. If you want to set more than 32 characters, make the setting from Web Control.
s
p.63
List of Functions
85