Eclipse - Fujitsu Ten CD5405 - Manual (Page 55)

55
Mounting instruction
Mounting the main unit
Insert the mounting sleeve into the opening in the vehicle
dash board or console box.
1
Use a screwdriver or the like to bend the tabs in the
mounting sleeve to secure the mounting sleeve.
2
Attach the side brackets to the main unit using flathead
screws. 3
BEND THE MOUNTING
TABS.
DASH BOARD
OR CONSOLE BOX
MOUNTING
SLEEVE 2
MAIN UNIT 1
SIDE BRACKETS [ x 2 ] 3
FLAT HEAD
SCREWS [ x 2 ]
(red: 5 x 8mm) 9
Mounting instruction
-If installing the main unit by the mounting sleeve-