Eclipse - Fujitsu Ten CD5405 User Manual

Page 51

If you have a question:

The remote
control does
not work.

No guide
tone sounds.

Frequencies
or titles set in
memory are
deleted.

Power does
not turn on.

Dead or
weak sound

Common
to all

Is MUTE functioning?

Problem

Mode

Causes

Remedial action
to take

Refer
to page

Is the fader or balance control set far
to one side?

Other probable causes include
broken audio-signal wiring or a faulty
speaker.

Are too many electrical items
installed, causing a lack of power?

Other probable causes include a
run-down car battery, broken power
or interconnection wiring.

Has the car battery been disconnected
for repair or checked out?

Are too many electrical items
installed and causing lack of
available power?

Other probable causes include run-
down car battery, broken power or
interconnection wiring.

Is the guide tone disabled?

Is the battery low?

Is the battery installed in reverse
polarity?

Is direct sunlight hitting the remote
control light receptor?

Other probable causes include a
malfunctioning remote control.

Cancel MUTE.

Readjust the fader and
balance controls to more
normal positions.

Have your dealer check
the problem.

Reenter them into
memory.

Have your dealer check
the problem.

Enable the guide tone.

Replace battery.

Reinstall the battery in the
correct polarity.

Use the remote control
close to the receptor.

Have your dealer check
the problem.

Is the volume control up sufficiently?

Turn up the volume control.

37,