Powerplus POWXQ5313 CIRCULAR SAW 1350W 185MM EN - Manual (Page 3)

POWXQ5313 EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
CIRCULAR SAW 1350W
POWXQ5313
1 APPLICATION
Your circular saw has been designed for sawing wooden workpieces. The machine is only
suitable for right-hand use. The machine is not suitable for stationary use. It is not designed for
commercial use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION
Fig 1
1.
Power Cable
2. Handle
3. Laser on/off switch
4. Guide handle
5. Laser
6. Spindle lock button
7. Lock lever for angle adjustment
8. Lock screw for edge guide
9. Edge guide
10. Marking for bevel cuts
11. Marking for straight cuts
12. Shoe
13. Dust extraction port
14. Lower guard lever
15. Saw blade
16. Outer Flange
17. Blade clamp screw
18. Lower guard
Fig 2
19. Lock lever for depth adjustment
20. Lock-off button
21. On/off switch
3 PACKAGE CONTENT LIST
 Remove all packaging materials.
 Remove remaining packaging and packing inserts (if included).
 Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
 Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
1 set of carbon brushes
1 wood-cutting saw blade (assembled)
1 edge guide
1 wrench
1 manual
1 small XQ catalogue
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine: