Symbols, Additional safety rules for cultivators, To ensure safe operation – Powerplus POWXG7205 CULTIVATOR 196CC EN User Manual
Page 4: Operator responsibility

POWXG7205
EN
Copyright © 2014 VARO NV
P a g e
| 4
www.varo.com
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal
injury or damage to the tool.
Wear gloves
Read manual before use
In accordance with essential safety
standards of applicable European
directives
Wear noise protection
No naked flame
Wear eye protection
No smoking
Wearing of protective shoes
advised
Cutting danger
Keep bystanders away
Warning! Flying objects
5 ADDITIONAL SAFETY RULES FOR CULTIVATORS
For your safety and the safety of others, please pay special attention to these precautions
This cultivator is designed to give safe and dependable service if operated according to
instructions.
Read and understand the owner's manual before operating the cultivator. Failure to do so
could result in personal injury or equipment damage.
Exhaust gas contains poisonous carbon monoxide.
Never run the cultivator in an enclosed area.
Be sure to provide adequate ventilation.
If a ventilation system is installed, ensure you follow the applicable safety rules.
The rotating parts are sharp and they turn at high speed. Accidental contact can cause
serious injury.
Keep your hands and feet away from the parts while engine is running.
Stop the engine and disengage the tines clutch before inspection or maintenance of tines.
Disconnect the spark plug cap to prevent any possibility of accidental starting. Wear heavy
gloves to protect your hands when clearing the tines or when inspecting or replacing the
tines.
5.1
To ensure safe operation
5.1.1
Operator responsibility
Keep the cultivator in good operating condition. Operating a cultivator in poor or
questionable condition could result in serious injury.
Be sure all safety devices are in working order and warning labels are in place. These
items are installed for your safety.
Be sure the safety covers (fan cover, recoil starter cover) are in place.