Powerplus POWXG7205 CULTIVATOR 196CC EN - Manual (Page 10)

POWXG7205 EN
Copyright © 2014 VARO NV P a g e | 10 www.varo.com
8.5.2 Reverse lever
 Engages wheels and tines into reverse.
 Pulling the reverse lever back towards the
operator reverses cultivator. Releasing the
lever stops the wheels and tines.
A) reverse lever
9 ADJUSTMENTS
Engine should be off before adjusting any controls.
Extreme caution should be used when operating cultivator in reverse
direction
9.1 Wheel lock pins
Place wheels in tilling position.
 Remove lock pin. Align hole in axle with hole in wheel hub.
 Insert lock pin through holes, fold lock pin ring to secure pin to axle.
 Firmly lock wheel and axle together before tilling.
 Repeat for other wheel.
NOTE: Always have both wheel lock pins in or out. Do not operate cultivator
with only one wheel locked.
To place wheels in free-wheel position.
 Remove lock pin. Slide wheel inward toward
machine.
 Insert pin in axle only.
 Wheel should turn freely on axle.
A) Wheel lock pin in free-wheel position. (axle hole only)