Powerplus POWX067 ANGLE GRINDER 2450W 230MM EN User Manual

Page 9

POWX067

p a g e

www.varo.com

7.4

Switching on / off

Before working with the angle grinder, check that the voltage shown on the
machine’s model plate is the same as the mains voltage being used.

Before engage the ON/OFF switch trigger, check that the grinding disc is
properly fitted and run smoothly, the outer flange is well tightened.

Fig. 6

7.4.1

Switching on

1. Insert the plug into a correctly installed mains socket.
2. Push forward the safety switch (6) on the ON / OFF switch (5), and at the same time push
the ON / OFF switch firmly inwards and keep it pressed.

7.4.2

Switching off

§ When you release the switch, the tool turns off.
§ Do not let go of grinder until it has stopped running.

The wheel continues to rotate after the tool is switched off.

7.5

Adjusting the main handle position

The main handle (4) element can be pivoted by 90°to the right or left.

Fig. 7

1. Depress position regulator button for main handle (7) and hold it in position.
2. Pivot the main handle in the desired direction.
3. Release position regulator button again in order to fix the main handle.