Powerplus POWX067 ANGLE GRINDER 2450W 230MM EN - Manual (Page 12)

POWX067
EN
Copyright © 2010 VARO p a g e | 12 www.varo.com
11 TECHNICAL DATA
Voltage / frequency 230-240V / 50Hz
Power input 2450W
No load speed 6000 min-1
Max. disc diameter: Ø 230mm
Drive spindle thread: M 14
Double insulated
12 SOUND EMISSION
Noise emission values measured according to relevant standard.
LpA (Sound pressure level) : 93 dB(A)
LwA (Sound power level) : 104 dB(A)
ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
aw (Vibration) : 6.4 m/s²
13 SERVICE DEPARTMENT
§ Damaged switches must be replaced by our after-sales service department.
§ If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a qualified specialist (qualified electrician).
14 STORAGE
§ Thoroughly clean the whole machine and its accessories.
§ Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
§ Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
§ Don’t keep it in plastic bags to avoid humidity build-up.
15 WARRANTY
§ This product is warranted as provided by law for a 36 -month period effective from the
date of purchase by the first user.
§ This warranty covers all material or production flaws. It does not include defective parts
subject to normal wear & tear such as bearings, brushes, cables, and plugs, or
accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from
maltreatment, accidents or alterations; nor the cost of transportation.
§ We reserve the right to reject a claim whenever the purchase cannot be verified or when
it is clear that the product has not been properly maintained. (Clean ventilation slots,
carbon brushes serviced regularly, etc.)
§ Your purchase receipt must be kept as proof of date of purchase.
§ Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.