Powerplus POWX067 ANGLE GRINDER 2450W 230MM EN User Manual

Page 7

Text mode
Original mode

POWX067

p a g e

www.varo.com

7 OPERATION

7.1

Fitting the auxiliary handle

Ensure that the plug is not in the socket when fitting or removing the
auxiliary handle.

Fig. 1

The auxiliary handle (8) can be attached to the angle grinder in three different positions: left,
on top and right.

7.2

Assembly the protective guard

Fig. 2

Fig. 3

1. Loosen the clip of the protective guard (9) by pulling lock lever of protective guard (1)
outward.
2. Turn the protective guard so that uncovered part of the disc is as far apart as possible from
the hand on main handle (4).
3. Fix the protection guard by pushing the lock lever

inwards

(the protective guard should no

longer be able to move).
NOTE: If the protective guard can not be fixed firmly by the lock lever (1), use a hexagon
wrench to tighten the hexagon nut. (See attached figure 4)