Powerplus POWX0560 PLUNGE SAW 1200W 165MM EN - Manual (Page 3)

POWX0560
EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
PLUNGE SAW 1200W
POWX0560
1 APPLICATION
The plunge saw is intended to cut wood and similar materials, gypsum and cement-bonded
fiber materials and plastic. With compatible special saw blades the plunge saw can also be
used to cut aluminum.
It is not designed for commercial use.
The plunge saw is only to be used with a specifically designed guide rail.
Installation in a differenct or homemade guide rail or workbench can cause
serious accidents.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. On/off switch
2. Lock-off button
3. Main handle
4. Auxiliary handle
5. Base
6. Anti-kickback knob
7. Adjustment knob for guide track
8. Bevel lock knob
9. Depth adjustment knob
10. Depth adjustment stopper
11. Depth scale
12. Blade
13. Slot for track
14. Cutting indicators
15. Cutting width indicators
16. Dust extraction outlet
17. Mode selector
18. Shaft lock
19. Carbon brush cap
3 PACKAGE CONTENT LIST
 Remove all packing materials
 Remove remaining packaging and transit supports (if existing)
 Check the completeness of the packing content
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
Plunge saw
1 x blade
2 x clamps 4 x split tracks
1 x canvas bag
When parts are missing or damaged, please contact your dealer.