Powerplus POWX0058BAG DRILL/SCREWDRIVER 18V 2 BATT EN - Manual (Page 10)

POWX0058BAG EN
Copyright © 2014 VARO P a g e | 10 www.varo.com
7.6 Speed selector (Fig. 7)
Fig. 7
NOTE： the -mark is the “Low speed” position, the -mark is the “High speed”
position (marks moulded in the button of two speed selector (3).)
The drill has a two-speed gear box designed for drilling at (LOW) or (HIGH)
speed. The gear selector is located on top of the drill to select either low or high speed. When
you push the button (5) forward and select low speed range, the speed will decrease but will
provide more power and torque. When using the drill in the high speed range, the speed will
increase but will provide less power and torque. Use the low speed for high power and torque
applications and the high speed for fast drilling applications.
Important: NEVER adjust this two speed selector（3）while the drill is running. Always let it
come to a complete stop.
7.7 LED light
Fig. 8
The LED work-light（13）can be lit
prior to motor running.
Press the on/off switch lightly, to keep
the work area lighted.
it also lights during operation.
WARNING:
Do not stare directly at the light beam.
Never aim the beam at any person or
an object other than the work piece.
Do not deliberately aim the beam at
personsl
Low speed High speed