Powerplus POW8041 MITRE SAW +UPPER TABLE 1200W 210MM EN - Manual (Page 11)

POW8041 EN
Copyright © 2014 VARO P a g e | 11 www.varo.com
Important! The cutting bevel of the teeth, i.e. the direction of rotation of the
saw Wade, has to conform with the direction of the arrow marked on the
housing.
 Re-mount the table insert (3), the splitter (30) and the blade guard (17) and secure in
place.
 When fastening the splitter (30} make sure that the distance between the teeth of the
blade and the splitter is a minimum 2 mm and a maximum 5 mm (Fig. 07).
 Before using the saw again, check that the safety devices are in good working order.
9 TECHNICAL DATA
Asynchronous motor 230 V - 50 Hz
Power rating 1200 W
Operating mode S1
idle speed 4500 min
-1
Carbide saw blade Ø 210 x Ø 30 x 2.5 mm
Number of teeth 24
Connector for dust extractor Ø35 mm
Standing area 400 x 285
Saw table 380 x 270 mm
Cutting height 0 – 33 mm
Parallel stop swinging range -30° to +30°
Tilting range -45° / 0° / +45°
Mitre cuts 0° to 45° to the left
Saw bed support 390 x 140 mm
Sawing width at 90° 120 x 55 mm
Sawing width at 45° 65 x 55 mm
Sawing width at 2 x 45°(double mitre cuts) 40 x 23 mm
Sawing width at 45° 120 x 35 mm
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 99 dB(A)
Acoustic power level LwA 112 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
11 WARRANTY
 This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
 This warranty covers all material or production flaws excluding: batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
 Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.