Powerplus POW7490 TILE CUTTER 600W 180MM 180MM EN - Manual (Page 8)

POW7490
EN
Copyright © 2015 VARO P a g e | 8 www.varo.com
10 TECHNICAL DATA
Rated Voltage AC (Un) 230V~
Rated Frequency (fn) 50Hz
Rated Power (Pn) 600W
Rotation Speed (n) 2950min
-1
Blade Size 180x22.2x2.2mm
Disc Diameter 180mm
Max. Cutting depth 35mm
Cable Length 2m
Maximum Cutting Capacity 90° - 0° 33.5mm
Maximum Cutting Capacity 45° - 0° 21mm
table size 330mm x 360mm
11 NOISE
Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level LpA 63 dB(A)
Acoustic power level LwA 76 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
12 SERVICE DEPARTMENT
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a qualified specialist (qualified electrician).
13 STORAGE
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.
14 WARRANTY
 This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
 This warranty covers all material or production flaws excluding: batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
 Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
 We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
 Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
 You can always obtain more information at the number 00 32 3 292 92 90.