Powerplus POW7490 TILE CUTTER 600W 180MM 180MM EN - Manual (Page 3)

POW7490
EN
Copyright © 2015 VARO P a g e | 3 www.varo.com
TILE CUTTER 600W - 180MM
POW7490
1 APPLICATION
Your tile cutter has been designed for cutting ceramic and clay paving and wall tiles.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. Table
2. Diamond cutting blade
3. Parallel guide
4. Water reservoir
5. Adjustment of table angle
6. On/off switch
7. Fixing screw of parallel guide
8. Angle guide
9. Dividing knife
10. Safety guard
3 PACKAGE CONTENT LIST
 Remove all packing materials.
 Remove remaining packaging and transit supports (if existing).
 Check the completeness of the packing content.
 Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
 Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 tile cutter
1 water tray
1 full-length adjustable fence
1 mitre guide
1 manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read manual before use Always wear safety goggles.
Always wear protective gloves.
In accordance with essential
requirements of the European
directive(s)