Epson Long-Focal Length zoom lens ELPLL02 - Manual (Page 8)

10
1. Before mounting the zoom lens
1-1 Safety precautions
Warning
Be sure to screw the Long throw zoom lens and adapter
ring down completely. Unless they are securely screwed
on, they could fall off and cause damage or injury (es-
pecially when the projector is ceiling-mounted).
1-2 Check product contents
•
Make sure that you have all the parts, as shown below, before starting.
•
In addition to the included screwdriver, you will also need a Phillips
screwdriver, and various other common tools.
Memo Be sure to use a Phillips screwdriver that fits
the screws properly.
Zoom lens
Front lens cap
Rear lens cap
Used to tighter/remove
mounting screws
Screwdriver
User’s manual (this document)
01.2.15, 4:23 PM Page 10