Epson Long-Focal Length zoom lens ELPLL02 - Manual (Page 2)

10
1. Before mounting the zoom lens
1-1 Safety precautions
Warning
Be sure to screw the Long-Focal Length lens and
adapter ring down completely. Unless they are securely
screwed on, they could fall off and cause damage or
injury (especially when the projector is ceiling-mounted).
1-2 Check product contents
•
Make sure that you have all the parts, as shown below, before starting.
•
In addition to the included screwdriver, you will also need a Phillips
screwdriver, and various other common tools.
Memo Be sure to use a Phillips screwdriver that fits
the screws properly.
Zoom lens
Front lens cap
Rear lens cap
Used to tighter/remove
mounting screws
Screwdriver
User’s manual (this document)
01.2.15, 4:20 PM Page 10