Empire Comfort Systems DVF-42-2 - Manual (Page 39)

R-5627 Page 39
OPTIONAL SIMULATED BRICK LINER
INSTALLATION INSTRUCTIONS
Direct Vent Fireplace
BRICK LINER KIT MODEL NUMBER
DVF- BL-36 DVF-36 DVF-36IP
DVF-BL-42 DVF-42 DVF-42IP
INSTALLING OPTIONAL SIMULATED BRICK PANELS
1. If installed, turn OFF gas supply to fireplace.
2. If installed, remove log assembly from fireplace.
3. The back panel is to be installed before the side panels. Place back
panel against the rear wall in fireplace.
4. Place one side panel against the side wall in fireplace. Align the
brick pattern on back panel and side panel.
5. To install the brick panel (Z) bracket you must first remove the
top and bottom screw on the side of the inner casing front as it
attaches to the outer casing. Now, place the brick panel (Z)
bracket over the front edge of the side panel. The clearance holes
on the brick panel (Z) bracket will align with the top and bottom
screw holes on the side of the inner casing front.
Reattach the top and bottom screws through the clearance holes
on the brick panel (Z) bracket and into the inner casing front.
6. Repeat Step 4 and Step 5 to attach the second side panel to
fireplace.
7. Installation of optional simulated brick panels is completed.
PARTS LIST
Part Description Kit Number Kit Number Quantity
DVF-BL-36 DVF-BL-42 Supplied
Brick Panel (Z) Bracket 10990 10991 2
Brick Panel - Side Right R-5201 R-5205 1
Brick Panel - Side Left R-5202 R-5206 1
Brick Panel - Back R-5200 R-5204 1
SIDE PANEL SIDE PANEL SIDE PANEL SIDE PANEL
BACK PANEL BACK PANEL
Z BRACKET Z BRACKET