Casio PCR-T500 - Manual (Page 78)

E-78
Advanced programmings and registrations
Programming functions of transaction keys
This section explains how you can program functions in each transaction keys
such as
F , h or m keys. For example, programming F key to force
entry of tendered amount.
Step Operation
1
Turn the Mode switch to PGM position and select [System
Setting] then press F key.
> ▪▪▪▪▪ >F
2
Enter 3 and press o key to set the register in the
programming mode.
3o
3
Referring the following tables, enter the program code then
press corresponding transaction key.
B ▪▪▪▪▪ Bm
(Program code)
The above example is for programming minus
key.
4
If you wish to program another transaction key, return to
step 3.
5
Press o key to complete the program.
o
Program code tables
Default value of all the program codes are “0”.
Program code for
F , h
and
k
keys.
Description Selection Program code
Prohibit partial payment.
a
No = 0
Yes = 1
B
(a+b+c) D7
Prohibit tendered amount entry
b
No = 0
Yes = 2
Force to enter tendered amount.
c
No = 0
Yes = 4
Print breakdown of VAT.
(Option for Single item or Currency exchange (including partial
tendering foreign currency).)
No = 0
Yes = 1
B
D6
Must be “0”
0
B
D5
Maximum amount for subtotal and tendered amount.
e.g.) $9000, D4 = 9, D3 = 3 D4: Maximum value (0 ~ 9) BB
D4 D3 D3: Number of zeros (0 ~ 9)
Maximum amount of change due. Maximum value (0 ~ 9) BB
D2 D1 Number of zeros (0 ~ 9)
Example 1: To set F key as prohibiting partial payment (a = 1), not prohibiting tendered amount
entry (b = 0), and forcing to enter tendered amount (c = 4): D7 = 6.
Press
3o6000000Fo