Casio TK-810 - Manual (Page 9)

9
Getting Started
To load 2-ply paper for printing of receipts
Follow steps
1 1 1 1 1
through
5 5 5 5 5
under "To load 1-ply paper for printing of receipts" above.
5.
Install receipt/journal paper. (continued…)
6 6 6 6 6
Separate the two sheets of
the paper.
8 8 8 8 8
Press the f key until
about 20 cm to 30 cm of
paper is fed from the
printer.
9 9 9 9 9
Insert the leading end of the inner sheet (which will be
your journal) into the take-up reel, as described
starting from
step
8 8 8 8 8
under "To load 1-ply paper for printing of a
journal."
0 0 0 0 0
Replace the printer cover, passing the leading end of the
outer sheet through the cutter slot. Tear off the excess
paper.
7 7 7 7 7
Join the ends of the paper
again and insert them into
the paper inlet.