Casio TK-810 - Manual (Page 7)

7
Getting Started
X
Z REG
OFF
RF
PGM
CAL
Important!
Never operate the cash register without paper.
It can damage the printer.
5 5 5 5 5
Work the paper roll gently
between the two spindles
so that they slip into the
center hubs of the roll.
1 1 1 1 1
Use a mode key to set the
mode switch to REG
position.
2 2 2 2 2
Remove the printer cover.
3 3 3 3 3
Cut off the leading end of
the paper so it is even.
4 4 4 4 4
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
1
2
8 8 8 8 8
Replace the printer cover,
passing the leading end of
the paper through the
cutter slot. Tear off the
excess paper.
7 7 7 7 7
Press the f key until
about 20 cm to 30 cm of
paper is fed from the
printer.
6 6 6 6 6
Insert paper to the paper
inlet.
5.
Install receipt/journal paper.
To load 1-ply paper for printing of receipts
Roll paper spindle
Paper inlet