Casio Presentation Draw - Manual (Page 5)

5
Presentation Draw Modes
Presentation Draw is an application that runs in the background. Starting up Presentation Draw while
you are using another application will cause that application to remain on the display. Mouse
operations, however, are taken over by Presentation Draw. This is called draw mode, which you can
use to draw figures and other objects on the currently displayed (projected) screen. Draw mode is
indicated when mouse cursor looks like this:
.
If you want to perform an operation in the other application while Presentation Draw is running, you
need to switch Presentation Draw to mouse mode. In mouse mode, Presentation Draw functions are
disabled, and both the mouse and pointer return to their normal operations. Mouse mode is indicated
when the mouse cursor looks like
, or when it takes on normal appearance for the application you
are using.
To toggle between draw mode and mouse mode
1.
Move the mouse cursor to the top of the screen.
2.
After the mouse cursor switches from to or from to , you can move
the mouse cursor to another location on the screen.
Note
z You also can switch from mouse mode to draw mode by right-clicking in the task tray and
then selecting “Draw Mode” on the menu that appears.
z You also can switch from draw mode to mouse mode by using the function menu. For details,
see “Function Menu” (page 6).
z In draw mode, the cursor appearance will change from the normal to whenever you are
using the zoom function.
In this mode: The mouse cursor looks like this: You can do this:
Draw Perform Presentation Draw functions with the pointer
or mouse.
Mouse or normal appearance for the
application you are using.
Perform normal computer mouse operations with the
pointer or mouse. Presentation Draw functions are not
enabled in mouse mode.