Using the zoom function, To zoom the projected image, E 10) – Casio Presentation Draw User Manual
Page 10
10
To zoom the projected image
1.
Start up Presentation Draw
z If Presentation Draw is already running but in mouse mode, switch to draw mode. For details,
see “To toggle between draw mode and mouse mode” (page 5).
2.
Press the pointer’s right mouse button to display the function menu.
z The mouse cursor changes to
while the function menu is displayed.
3.
Move
to
and then press the pointer’s left mouse button. On the submenu
that appears, select the zoom factor you want.
z The zoom factor is remembered for the currently logged in user.
4.
To close the function menu, move
to
and then press the pointer's left
mouse button, or press the right mouse button again.
z This causes the mouse cursor to change to
.
5.
Specify the area you want to enlarge by dragging on the screen as shown below.
z The area you specify is enlarged in the center of the screen in accordance of the currently
specified zoom factor. At this time, everything outside of the zoomed display range will
become dark.
z Each time you select another part of the image by dragging, that part will be zoomed.
6.
To cancel the zoom operation, press the pointer’s left mouse button.
Using the Zoom Function