Extron Electronics RAC 104 - Manual (Page 17)

RAC 104 • Installation and Operation 2-5
Projector mounting
Projector mount the RAC 104 using the optional PMK 100 pole
mount kit (part #70-217-01) as follows:
1 . Remove rubber feet if they were previously installed on
the bottom of the RAC 104.
2 . Attach the projector mounting brackets to the RAC 104
with the machine screws provided.
3 . Secure the RAC 104 to a projector mount or other surface
by inserting the mounting bolt through the bracket’s
slotted hole, as shown below.
Digital Projector
Projector
Mounting
Bracket
RAC 104 ON
INPUTS
OUTPUTS
LINE LEVEL
IN AB A B OUT +4 dBu -10 dBV
Tx Rx RS-232
PO WER
12V 0.2A MAX
A 1
2
B 34
A 1
2
B 34
Mounting
Bolt
Mounting the RAC 104 on a projector mount