Edelbrock 3550 - Manual (Page 2)

2
Pro-Flo EFI Installation Instructions
©2005 Edelbrock Corporation
Brochure No. 63-0115 Rev. 10/05
COMPONENTS
❑ Electronic Control Unit/System ECU ❑ Fuel filter
❑ Calibration Module ❑ Fuel rail assembly
❑ Distributor conversion kit ❑ Fuel pressure regulator
❑ Ignition amplifier ❑ Fuel injectors
❑ ECU power relay/Fuel pump relay ❑ Intake manifold
❑ Manifold Absolute Pressure (MAP) Sensor ❑ Four barrel air valve
❑ Manifold Air Temperature (MAT) Sensor ❑ Idle Air Control (IAC) solenoid, integrated with air valve
❑ Coolant Temperature Sensor (CTS) ❑ Main system harness
❑ Throttle Position Sensor (TPS), integrated with air valve ❑ Fuel pump harness
❑ Oxygen (O
2
) sensor ❑ Installation package
❑ High pressure fuel pump
Many Pro-Flo components, including the Manifold Absolute Pressure sensor, fuel pressure regulator, Coolant Temperature sensor, and the fuel
filter are standard OEM pieces. In the event that one of these parts needs to be replaced, you are likely to find a replacement at your local parts
supplier, in addition to your local Edelbrock dealer or directly from Edelbrock. For a list of part numbers, refer to the
PART NUMBERS section at
the back of this manual.