Edelbrock 3550 - Manual (Page 18)

18
Pro-Flo EFI Installation Instructions
©2005 Edelbrock Corporation
Brochure No. 63-0115 Rev. 10/05
The Coolant Temperature sensor attaches to the harness
with Connector J10.
The Manifold Absolute Pressure sensor attaches to the
harness with Connector J9.
The Manifold Air Temperature sensor attaches to the
harness with Connector J11.
Only the fuel injector connectors are identical, but they are placed in
logical sequence. Refer to the diagram when installing the harness
connectors to the fuel injectors. In addition to the Main System Harness,
the Pro-Flo system includes these shorter harnesses:
A. IAC to Main System Harness
B. Ignition amplifier to distributor
C. Fuel pump to Main System Harness
The Throttle Position sensor attaches to the harness with
Connector J8.