Casio QV-8000SX - Manual (Page 73)

E-73
OTHER RECORDING FUNCTIONS
4.
Keeping the camera pointed at the white sheet
of paper, press DISP to make the manual white
balance settings.
• Pressing the shutter button at this time returns the
camera to the white balance setting that was obtained
the last time you performed this manual white balance
procedure.
5. The manual white balance procedure stops au-
tomatically when it is done.
• If the manual white balance procedure does not end
automatically, press the shutter button to interrupt it.
6.
After the camera finishes making the white bal-
ance setting, it returns to the screen in step 3
above. Select “Exit” to exit the manual white
balance procedure.
NOTE
White balance is automatically set to “Day Light” when-
ever you enter the Night Scene Mode. You can leave
this as it is or change it using the above procedure.
Recording Mode Power On Settings
A power on setting is one that is set by the camera automati-
cally whenever you turn it on. Normally, the camera uses its
own built-in power on default settings.
The following table shows the items whose settings you can
save in mode memory. Note that the procedure described
here only lets you select ON (save current setting in mode
memory) or OFF (use the camera’s preset default setting).
On
AF, MF, ,
Auto, , ,
Off, Auto, X2, X4
Multi, Center, Spot
Auto, Day Light, Shade,
Tungsten, Fluorescent, Manual
Strong, Normal, Weak
Auto, F3.2, F4.8, F8
Auto, Manual (Bulb, 64 to 1/2000
second)
Off
AF
Auto
Auto
Multi
Auto
Normal
Auto
Auto
Mode Memory
Item
Focus
Flash
Digital Zoom
Metering
White Balance
Flash Intensity
Aperture
Shutter Speed
Mode 2 (Mode Memory 2)
Mode 1 (Mode Memory 1)