Casio XW-G1 - Manual (Page 92)

Using a Memory Card
E-90
• Make sure that all of the data you want to load is in the
MUSICDAT folder on the memory card.
1.
Insert the memory card into the card slot.
2.
Referring to the table in step 2 of the procedure
under “To save Synthesizer data to a memory
card” (page E-88), perform the procedure
required for the type of data you want to load
from the card.
3.
Use the
br
up (q) and down (w) buttons to
move the item selection cursor (0) to “Card
Load” (or “Load” if you want to load all data)
and then press
br
ENTER.
• This causes a menu screen like the one shown below
to appear on the display. The sample screen below
shows the screen that appears when you perform this
procedure from the Step Sequencer Mode.
4.
Use the
bp
dial or
br
minus (–) and plus (+)
buttons to display the file you want to import.
5.
Use the
br
down (w) button to move the
cursor downwards, and then use the
bp
dial or
br
minus (–) and plus (+) buttons to display the
destination of the load operation.
6.
Press the
br
ENTER button.
7.
In response to the “Sure?” message that
appears, press the
br
YES button to load or the
br
NO button to cancel.
1.
Press
7
SETTING.
2.
Use the
br
up (q) and down (w) buttons to
move the item selection cursor (0) to
“CardUtility” and then press
br
ENTER.
• This causes the “CARD UTIL” screen to appear.
3.
Use the
br
up (q) and down (w) buttons to
move the item selection cursor (0) to “All
Data” and then press
br
ENTER.
• The remainder of the steps are the same as those from
step 3 under “To load data to Synthesizer memory from
a memory card” (page E-90).
1.
Insert the memory card into the card slot.
2.
Press
7
SETTING.
3.
Use the
br
up (q) and down (w) buttons to
move the item selection cursor (0) to
“CardUtility” and then press
br
ENTER.
• This causes the CARD UTIL screen to appear.
4.
Use the
br
up (q) and down (w) buttons to
move the item selection cursor (0) to “Delete”
and then press the
br
ENTER button.
• This displays a screen for specifying the file to be
deleted.
5.
Use the
bp
dial or
br
minus (–) and plus (+)
buttons to display the file you want to delete.
6.
Press the
br
ENTER button.
7.
In response to the “Sure?” message that
appears, press the
br
YES button to delete or
the
br
NO button to cancel.
• Pressing the
br
YES button displays the message
“Please Wait” (indicating the operation is in progress).
Do not perform any operation while this message is on
the display. “Complete!” appears on the display after
the operation is complete.
Loading Data from a Memory
Card
To load data to Synthesizer memory from a
memory card
To batch load all Synthesizer memory data
from a memory card
To delete a file from a memory
card