Casio XW-G1 - Manual (Page 21)

Selecting and Creating Tones
E-19
1.
Press
7
TONE.
The button will light and the Synthesizer will enter the Tone Mode.
2.
Press
bq
PRESET/USER to select preset tones or user tones.
• Preset tones are selected while the button is unlit, while user tones are selected while the button is lit.
3.
Use the
bq
number buttons (0 to 9) to input a tone number.
• You also can select a tone number by rotating the
bp
dial.
• One more way to change the tone number is to use the
br
minus (–) and plus (+) buttons to decrease or increase the
displayed number. Pressing the
br
minus (–) and plus (+) buttons at the same time will jump to the first tone in the current
selected category (see next section).
■ Tone Category Overview
• See the separate “Appendix” for a complete list of tones.
To select a tone
Category
Description
Number of Tones
Number
Name Preset User
Preset User
P000-P099 U000-U099 Solo Synthesizer
This category contains traditional analog synthesizer
tones. You can select a waveform as a base, and
then edit the three elements of a sound (pitch, tone,
volume) to create exactly the sound you want.
Monophonic.
100 100
P100-P399 U100-U199 PCM Melody Tone The tones in this category let you use sampled
sounds to reproduce the sounds from a variety of
different instruments.
300 100
P400-P419 U300-U309 PCM Drum Tone 20 10
– U200-U210 User Wave Tone
Edits the wave of a sound recorded with the sample
looper (page E-64). The wave of a sound can be
edited and saved as a user wave tone.
• User wave tone U210 is a tone that is changed in
real-time by sample looper recording.
– 11
Zone Part 1 Zone Part 2 Zone Part 3 Zone Part 4
(MIDI
Channel 1)
(MIDI
Channel 2)
(MIDI
Channel 3)
(MIDI
Channel 4)
Zone 1
settings
Zone 2
settings
Zone 3
settings
Zone 4
settings
Built-in sound
source
External device