Casio E-125 Mail Setup Tool V.1.2 User Manual
Page 15
Mail Setup Tool (Version 1.2US) User's Guide -Page
15 -
Configuring Your Modem
The required modem configuration depends on the modem you are using, the type of
telephone circuit to which you are connected, and the requirements of your ISP. Use the
following procedure to change the configuration of your modem.
To change the configuration of your modem
1.
While using Mail Setup Tool to configure a new ISP (page 3) or to edit an existing
ISP configuration (page 10), display the Select Modem screen.
2.
Tap the Connection Properties button to display Connection Properties
screen.
3.
On the Port Settings tab, make the settings required to connect to your ISP's
access point. Set the Baud Rate to a value that is within the range supported by
your ISP's access point
4.
The settings you can make with the Call Options tab depend on the type of
telephone circuit you are connecting through, and on the type of modem you are
using. For proper operation, some modems may require input of a character string
commands in the Extra dial-string modem commands box.
5.
After everything is the way you want, tap OK to save your settings.
Note
Except for the Baud Rate setting, it is usually best to leave the settings on the
Connection Properties screen set to their initial defaults.