Casio XJ-H2600 User Guide - Manual (Page 28)

28
Basic Setup Menu Example
The procedure below shows how to configure the following three settings:
z Image Adjustment 1 J Contrast
z Image Adjustment 1 J Color Mode
z Input Settings J Signal Name Indicator
Note
z The setup menu items that you can change depend on whether or not an image signal is being
input to the projector, and on the currently selected input source. Perform the procedure
below after starting projection of an image from an input source in the normal input mode. See
“3D Input Mode” on page 17 for information about how to do this.
z This example covers basic steps only. For more detailed information, see “Setup Menu
Contents” on page 38.
To configure the “Image Adjustment 1
J Contrast” setting
1.
Press the [MENU] key to display the setup menu.
2.
“Image Adjustment 1” is initially selected on the main menu, so simply press the
[ENTER] key.
3.
Use the [
T] key to select “Contrast”.
4.
Use the [
W] (lighter) and [X] (darker) keys to adjust contrast.