Casio GV-10 2 - Manual (Page 38)

REFERENCE
82
1. Batteries are not oriented correctly.
2. Batteries are dead.
3. Wrong AC adaptor type being used.
1. Auto Power Function activated (page 37).
2. Batteries are dead.
Batteries are low.
1. Dial is not set to a recording mode.
2. Flash unit is being charged.
3. The message “MEMORY FULL” is on the
monitor screen.
4. No memory card is loaded in the camera.
Batteries are dead.
1. Macro mode being used for scenery or por-
traits.
2. Normal mode being used for macro im-
age.
Troubleshooting
Problem Possible Cause Action
Power
Recording
Power does not turn on.
Camera suddenly powers
down.
indicator on the moni-
tor screen
No recording when the
shutter release button is
pressed
Camera powers down dur-
ing self-timer countdown.
Monitor screen image is out
of focus.
1. Orient batteries correctly (page 30).
2. Replace batteries with a full set of new ones
(page 30).
3. Use only an AD-C620/C630 AC adaptor.
1. Turn power back on.
2. Replace batteries with a full set of new ones
(page 30).
Replace batteries with a full set of new ones (page
30).
1. Set the dial to a recording mode.
2. Wait until flash unit charging finishes.
3. Delete images you no longer need, or use a
different memory card.
4. Load a memory card.
Replace batteries with a full set of new ones (page
30).
1. Set the Normal/Macro selector to (Nor-
mal) for scenery and portraits.
2. Set the Normal/Macro selector to (Macro) for
macro images.