Casio GV-10 2 - Manual (Page 31)

CONNECTING TO EXTERNAL EQUIPMENT
75
Using a Memory Card to Transfer Image Data
In addition to the cable connections described in the previ-
ous sections, you can also exchange data between your
camera and computer by reading it directly from the memory
card. The Photo Loader software that comes on the bundled
CD-ROM disc automatically reads the images from the
memory card and stores them in folders on your computer’s
hard disk.
The following provides general information about how to di-
rectly read images from a memory card. Certain details may
be different depending on the type of computer you are us-
ing.
■ Computer Equipped with a CompactFlash Card Slot
Simply insert the memory card into your computer’s
CompactFlash card slot.
Disconnecting the USB Cable
Windows Me or 98
Disconnect the USB cable from the camera, and then turn off
the camera.
• After completing data communication over a USB connec-
tion, use one of the prescribed procedures below to discon-
nect the USB cable.
• You cannot turn off the camera while the USB cable is con-
nected. Disconnect the USB cable before turning off the
camera.
Windows XP or 2000
Click card services in the task tray on your computer screen,
and disable the drive number assigned to the camera. Next,
disconnect the USB cable from the camera, and then turn off
the camera.
Macintosh
In Finder, drag the camera to the trashcan. Next, disconnect
the USB cable from the camera and then turn off the camera.