Nikon KeyMission 80 - Manual (Page 2)

6 Scroll through the screen on the camera and when the screen shown on the
right is displayed, launch the SnapBridge app on the smart device.
SnapBridge app.
Cancel
App
Camera
SnapBridge
KeyMission 80_xxxxxxxx
7 When the screen shown on the right is displayed on the smart device, tap the
camera name.
• When the accessory selection screen is displayed, tap the camera name after the
B Bluetooth icon in top right corner of the smart device screen changes from white to
grey. It may take a while before the camera name is displayed.
Connect to Camera
Camera name
KeyMission 80_xxxxxxxx
8 Check the authentication code.
• Confirm that the camera and smart device display the same
authentication code.
• Perform the following operations on the camera and smart device
at the same time.
- On the camera, tap OK.
- On the smart device, tap Pairing (the name of the button varies
with the OS version).
OK
select OK.
Back
Auth. code
XXXXXX
9 Follow the on-screen instructions to complete the pairing process.
• Camera: If pairing is successful, the screen shown on the right is displayed. Tap Next, and
then follow the on-screen instructions.
• Smart device: Follow the on-screen instructions.
connected!
SnapBridge will
send your photos
to your smart
device as
they are taken.
Next
When You Cannot Pair
Perform the following and then pair again by proceeding to “Pairing Procedure”.
• Press the d (menu) button on the camera, and then tap b (turn off ) to turn off the camera.
• Close the SnapBridge app.
• Remove the Bluetooth device (registered as
the camera name) in the Bluetooth setting
screen of the smart device.
To Learn More About Using the SnapBridge App
See the online help (tap Other M Info/settings M Instructions in the app).
Trademark Information
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Nikon Corporation is under license.
• iOS is a trademark or registered trademark of Cisco Systems, Inc., in the United States and/or other countries and
is used under license.
• Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi Alliance.
B Password for Wi-Fi Connection
• You can check the password in z setup menu M Camera settings M Network menu M Wi-Fi M Current
settings. The default password is “NikonKeyMission”. The password is case-sensitive.
• We recommend that you change the password to protect your privacy. You can check or change the password
in z setup menu M Camera settings M Network menu M Wi-Fi M Current settings M Password.