Operation buttons – Casio DT-10 User Manual

Page 5

• Station IP Info

IP Address – IP address of the card or module

Not : Check with your ne work administrator for IP configuration information.

• BSS ID/IBSS ID

Shows the Network Name and the MAC address of the access point the card is associated with in the AP mode.
Or it shows the Network Name and the MAC address of the creator of IBSS which the card is joined into in the
Peer-to-Peer (Ad-Hoc) mode.

•

Help button: open a context sensitive help window.

1.1.1.２ Operation

Buttons

• Disable/Enable Radio

Click this button in toggle to disable/enable the radio link from the card.
• Rescan

Click on this button to start a rescan process to search for an AP with stronger signal in the network.
• Renew IP

Click this button to reapply IP address from DHCP server when automatic DHCP is enabled.
• More Info

Click this button to show detailed TCP/IP info (see Figure 2):

Figure 2 More Info window

Click OK to close this window.

• Ping

Click this button to pop up the Ping window as shown in Figure 3.