Casio DT-10 User Manual

Page 10

Figure 6 Authentication tab

Authentication Algorithm - Five options, only configurable when WEP Method is enabled.

1. WECA Compliant (always use Open) - Should match AP's setting for "Open."

2. Must use Shared with WEP - Should match AP's setting for "Shared."

3. Automatic based on WEP setting - Automatically matches AP's setting.

4. WPA-PSK - Need Pre-Shared Key for access.

5. WPA

- Need network certificate for authentication.

WEP Method - Five options for WEP Key encryption.

1. Disabled - WEP Key Off

2. 64 bit (HEX) - 10 characters configurable in Hexadecimal

3. 64 bit (ASCII) - 5 characters configurable in ASCII

4. 128 bit (HEX) - 26 characters configurable in Hexadecimal

5. 128 bit (ASCII) - 13 characters configurable in ASCII

6. TKIP - Only used when WPA is selected.

NOTE: HEX - Hexadecimal number set of 16 digits from 0-9, and from A(a)-F(f). ASCII - Any

printable ASCII characters.

Key ID - Four options can be selected: Key 1, 2, 3, and 4. The default is Key 1.

WPA security implementation is targeted at enterprise markets only. In order to activate, a certificate

enrollment program must be installed from the company’s IT department in order to obtain the user’s
personal certificate.