Casio 140CR - Manual (Page 9)

P
a
rt-1
9
E
Part-1 QUICK START OPERATION
QUICK START OPERATION Part-1
1. Initialization / Loading Memory Protection Battery
Important
You must initialize
the Cash register.
◗ To initialize the cash register
1. Set the Mode Switch to OFF.
2. Load the memory protection batteries.
3. Plug the power cord of the cash register into an AC outlet.
4. Set the Mode Switch to REG.
(Figure 1)
Note: To prevent to lose all of your settings and sales data, we reccomend you to install the
memory protection batteries.
◗ To load the memory protection batteries
1. Remove the printer cover.
2. Open the battery compartment cover.
3. Load 3 new UM-3, or R6P (SUM-3) type batteries into the
compartment. Be sure that the plus (+) and minus (–) ends
of each battery are facing in the directions indicated by the il-
lustrations inside the battery compartment (Figure 1).
4. Replace the memory protection battery compartment cover
back into place.
5. Replace the printer paper and printer cover.
REPLACE MEMORY PROTECTION BATTERIES AT LEAST ONCE EVERY YEAR.